[Tukash]

JohnDes,
Вот скрипты, пробуй!

Код:

[_Code]
const
Archives = '{src}\*.cab'; // укажите расположение архивов FreeArc; для внешних файлов строку в [Files] добавлять необязательно

PM_REMOVE = 1;
CP_ACP = 0; CP_UTF8 = 65001;
oneMb = 1048576;

type
#ifdef UNICODE ; если у вас ошибка на этой строке, то установите препроцессор или исправьте скрипт для вашей версии Inno Setup
#define A "W"
#else
#define A "A" ; точка входа в SetWindowText, {#A} меняется на A или W в зависимости от версии
PAnsiChar = PChar; // Required for Inno Setup 5.3.0 and higher. (требуется для Inno Setup версии 5.3.0 и ниже)
#endif
#if Ver < 84018176
AnsiString = String; // There is no need for this line in Inno Setup 5.2.4 and above (для Inno Setup версий 5.2.4 и выше эта строка не нужна)
#endif

TMyMsg = record
hwnd: HWND;
message: UINT;
wParam: Longint;
lParam: Longint;
time: DWORD;
pt: TPoint;
end;

TFreeArcCallback = function (what: PAnsiChar; int1, int2: Integer; str: PAnsiChar): Integer;
TArc = record Path: string; OrigSize: Integer; Size: Extended; end;

var
ExtractFile: TLabel;
lblExtractFileName: TLabel;
btnCancelUnpacking: TButton;
CancelCode, n, UnPackError, StartInstall: Integer;
Arcs: array of TArc;
msgError: string;
lastMb: Integer;
baseMb: Integer;
totalUncompressedSize: Integer; // total uncompressed size of archive data in mb
LastTimerEvent: DWORD;

Function MultiByteToWideChar(CodePage: UINT; dwFlags: DWORD; lpMultiByteStr: string; cbMultiByte: integer; lpWideCharStr: string; cchWideChar: integer): longint; external 'MultiByteToWideChar@kernel32.dll stdcall';
Function WideCharToMultiByte(CodePage: UINT; dwFlags: DWORD; lpWideCharStr: string; cchWideChar: integer; lpMultiByteStr: string; cbMultiByte: integer; lpDefaultChar: integer; lpUsedDefaultChar: integer): longint; external 'WideCharToMultiByte@kernel32.dll stdcall';

function PeekMessage(var lpMsg: TMyMsg; hWnd: HWND; wMsgFilterMin, wMsgFilterMax, wRemoveMsg: UINT): BOOL; external 'PeekMessageA@user32.dll stdcall';
function TranslateMessage(const lpMsg: TMyMsg): BOOL; external 'TranslateMessage@user32.dll stdcall';
function DispatchMessage(const lpMsg: TMyMsg): Longint; external 'DispatchMessageA@user32.dll stdcall';

Function OemToChar(lpszSrc, lpszDst: AnsiString): longint; external 'OemToCharA@user32.dll stdcall';
function GetWindowLong(hWnd, nIndex: Integer): Longint; external 'GetWindowLongA@user32 stdcall delayload';
function SetWindowText(hWnd: Longint; lpString: String): Longint; external 'SetWindowText{#A}@user32 stdcall delayload';

function GetTickCount: DWord; external 'GetTickCount@kernel32';
function WrapFreeArcCallback (callback: TFreeArcCallback; paramcount: integer):longword; external 'wrapcallback@files:innocallback.dll stdcall';
function FreeArcExtract (callback: longword; cmd1,cmd2,cmd3,cmd4,cmd5,cmd6,cmd7,cmd8,cmd9,cmd10: PAnsiChar): integer; external 'FreeArcExtract@files:unarc.dll cdecl';

procedure AppProcessMessage;
var
Msg: TMyMsg;
begin
while PeekMessage(Msg, 0, 0, 0, PM_REMOVE) do begin
TranslateMessage(Msg);
DispatchMessage(Msg);
end;
end;

// Перевод числа в строку с точностью 3 знака (%.3n) с округлением дробной части, если она есть
Function NumToStr(Float: Extended): String;
Begin
Result:= Format('%.3n', [Float]); StringChange(Result, ',', '.');
while ((Result[Length(Result)] = '0') or (Result[Length(Result)] = '.')) and (Length(Result) > 1) do
SetLength(Result, Length(Result)-1);
End;

function cm(Message: String): String; Begin Result:= ExpandConstant('{cm:'+ Message +'}') End;

Function Size64(Hi, Lo: Integer): Extended;
Begin
Result:= Lo;
if Lo<0 then Result:= Result + $7FFFFFFF + $7FFFFFFF + 2;
for Hi:= Hi-1 Downto 0 do
Result:= Result + $7FFFFFFF + $7FFFFFFF + 2;
End;

// Converts OEM encoded string into ANSI
// Преобразует OEM строку в ANSI кодировку
function OemToAnsiStr( strSource: AnsiString): AnsiString;
var
nRet : longint;
begin
SetLength( Result, Length( strSource ) );
nRet:= OemToChar( strSource, Result );
end;

// Converts ANSI encoded string into UTF-8
// Преобразует строку из ANSI в UTF-8 кодировку
function AnsiToUtf8( strSource: string ): string;
var
nRet : integer;
WideCharBuf: string;
MultiByteBuf: string;
begin
strSource:= strSource + chr(0);
SetLength( WideCharBuf, Length( strSource ) * 2 );
SetLength( MultiByteBuf, Length( strSource ) * 2 );

nRet:= MultiByteToWideChar( CP_ACP, 0, strSource, -1, WideCharBuf, Length(WideCharBuf) );
nRet:= WideCharToMultiByte( CP_UTF8, 0, WideCharBuf, -1, MultiByteBuf, Length(MultiByteBuf), 0, 0);

Result:= MultiByteBuf;
end;

// OnClick event function for btnCancel
procedure btnCancelUnpackingOnClick(Sender: TObject);
begin
if MsgBox( SetupMessage( msgExitSetupMessage ), mbInformation, MB_YESNO ) = IDYES then
CancelCode:= -127;
end;

var origsize: Integer;
// The callback function for getting info about FreeArc archive
function FreeArcInfoCallback (what: PAnsiChar; Mb, sizeArc: Integer; str: PAnsiChar): Integer;
begin
if string(what)='origsize' then origsize := Mb else
if string(what)='compsize' then else
if string(what)='total_files' then else
Result:= CancelCode;
end;

// Returns decompressed size of files in archive
function ArchiveOrigSize(arcname: string): Integer;
var
callback: longword;
Begin
callback:= WrapFreeArcCallback(@FreeArcInfoCallback,4); //FreeArcInfoCallback has 4 arguments
CancelCode:= 0;
AppProcessMessage;
try
// Pass the specified arguments to 'unarc.dll'
Result:= FreeArcExtract (callback, 'l', '--', AnsiToUtf8(arcname), '', '', '', '', '', '', '');
if CancelCode < 0 then Result:= CancelCode;
if Result >= 0 then Result:= origsize;
except
Result:= -63; // ArcFail
end;
end;

// Scans the specified folders for archives and add them to list
function FindArcs(dir: string): Extended;
var
FSR: TFindRec;
Begin
Result:= 0;
if FindFirst(ExpandConstant(dir), FSR) then begin
try
repeat
// Skip everything but the folders
if FSR.Attributes and FILE_ATTRIBUTE_DIRECTORY > 0 then CONTINUE;
n:= GetArrayLength(Arcs);
// Expand the folder list
SetArrayLength(Arcs, n +1);
Arcs[n].Path:= ExtractFilePath(ExpandConstant(dir)) + FSR.Name;
Arcs[n].Size:= Size64(FSR.SizeHigh, FSR.SizeLow);
Result:= Result + Arcs[n].Size;
Arcs[n].OrigSize := ArchiveOrigSize(Arcs[n].Path)
totalUncompressedSize := totalUncompressedSize + Arcs[n].OrigSize
until not FindNext(FSR);
finally
FindClose(FSR);
end;
end;
End;

// Sets the TaskBar title
Procedure SetTaskBarTitle(Title: String); var h: Integer;
Begin
h:= GetWindowLong(MainForm.Handle, -8); if h <> 0 then SetWindowText(h, Title);
End;

// Converts milliseconds to human-readable time
// Конвертирует милисекунды в человеко-читаемое изображение времени
Function TicksToTime(Ticks: DWord; h,m,s: String; detail: Boolean): String;
Begin
if detail {hh:mm:ss format} then
Result:= PADZ(IntToStr(Ticks/3600000), 2) +':'+ PADZ(IntToStr((Ticks/1000 - Ticks/1000/3600*3600)/60), 2) +':'+ PADZ(IntToStr(Ticks/1000 - Ticks/1000/60*60), 2)
else if Ticks/3600 >= 1000 {more than hour} then
Result:= IntToStr(Ticks/3600000) +h+' '+ PADZ(IntToStr((Ticks/1000 - Ticks/1000/3600*3600)/60), 2) +m
else if Ticks/60 >= 1000 {1..60 minutes} then
Result:= IntToStr(Ticks/60000) +m+' '+ PADZ(IntToStr(Ticks/1000 - Ticks/1000/60*60), 2) +s
else Result:= IntToStr(Ticks/1000) +s {less than one minute}
End;

// The main callback function for unpacking FreeArc archives
function FreeArcCallback (what: PAnsiChar; Mb, sizeArc: Integer; str: PAnsiChar): Integer;
var
percents, Remaining: Integer;
s: String;
begin
if GetTickCount - LastTimerEvent > 1000 then begin
// This code will be executed once each 1000 ms (этот код будет выполняться раз в 1000 миллисекунд)
// ....
// End of code executed by timer
LastTimerEvent := LastTimerEvent+1000;
end;

if string(what)='filename' then begin
// Update FileName label
lblExtractFileName.Caption:= FmtMessage( cm( 'Extracting' ), [OemToAnsiStr( str )] )
end else if (string(what)='write') and (totalUncompressedSize>0) and (Mb>lastMb) then begin
// Assign to Mb *total* amount of data extracted to the moment from all archives
lastMb := Mb;
Mb := baseMb+Mb;

// Update progress bar
WizardForm.ProgressGauge.Position:= Mb;

// Show how much megabytes/archives were processed up to the moment
percents:= (Mb*1000) div totalUncompressedSize;
s := FmtMessage(cm('ExtractedInfo'), [IntToStr(Mb), IntToStr(totalUncompressedSize)]);
if GetArrayLength(Arcs)>1 then
s := s + '. '+FmtMessage(cm('ArcInfo'), [IntToStr(n+1), IntToStr(GetArrayLength(Arcs))])
ExtractFile.Caption := s

// Calculate and show current percents
percents:= (Mb*1000) div totalUncompressedSize;
s:= FmtMessage(cm('AllProgress'), [Format('%.1n', [Abs(percents/10)])]);
if Mb > 0 then Remaining:= trunc((GetTickCount - StartInstall) * Abs((totalUncompressedSize - Mb)/Mb)) else Remaining:= 0;
if Remaining = 0 then SetTaskBarTitle(cm('ending')) else begin
s:= s + '. '+FmtMessage(cm('remains'), [TicksToTime(Remaining, cm('hour'), cm('min'), cm('sec'), false)])
SetTaskBarTitle(FmtMessage(cm('taskbar'), [IntToStr(percents/10), TicksToTime(Remaining, 'h', 'm', 's', false)]))
end;
WizardForm.FileNameLabel.Caption := s
end;
AppProcessMessage;
Result:= CancelCode;
end;

// Extracts all found archives
function UnPack(Archives: string): Integer;
var
totalCompressedSize: Extended;
callback: longword;
FreeMB, TotalMB: Cardinal;
begin
// Display 'Extracting FreeArc archive'
lblExtractFileName.Caption:= '';
lblExtractFileName.Show;
ExtractFile.caption:= cm('ArcTitle');
ExtractFile.Show;
// Show the 'Cancel unpacking' button and set it as default button
btnCancelUnpacking.Caption:= WizardForm.CancelButton.Caption;
btnCancelUnpacking.Show;
WizardForm.ActiveControl:= btnCancelUnpacking;
WizardForm.ProgressGauge.Position:= 0;
// Get the size of all archives
totalUncompressedSize := 0;
totalCompressedSize := FindArcs(Archives);
WizardForm.ProgressGauge.Max:= totalUncompressedSize;
// Other initializations
callback:= WrapFreeArcCallback(@FreeArcCallback,4); //FreeArcCallback has 4 arguments
StartInstall:= GetTickCount; {время начала распаковки}
LastTimerEvent:= GetTickCount;
baseMb:= 0

for n:= 0 to GetArrayLength(Arcs) -1 do
begin
lastMb := 0
CancelCode:= 0;
AppProcessMessage;
try
// Pass the specified arguments to 'unarc.dll'
Result:= FreeArcExtract (callback, 'x', '-o+', '-dp' + AnsiToUtf8( ExpandConstant('{app}') ), '--', AnsiToUtf8(Arcs[n].Path), '', '', '', '', '');
if CancelCode < 0 then Result:= CancelCode;
except
Result:= -63; // ArcFail
end;
baseMb:= baseMb+lastMb

// Error occured
if Result <> 0 then
begin
msgError:= FmtMessage(cm('ArcError'), [IntToStr(Result)]);
GetSpaceOnDisk(ExtractFileDrive(ExpandConstant('{app}')), True, FreeMB, TotalMB);
case Result of
-1: if FreeMB < 32 {Мб на диске} then msgError:= SetupMessage(msgDiskSpaceWarningTitle)
else msgError:= msgError + #13#10 + FmtMessage(cm('ArcBroken'), [ExtractFileName(Arcs[n].Path)]);
-127: msgError:= cm('ArcBreak'); //Cancel button
-63: msgError:= cm('ArcFail');
end;
// MsgBox(msgError, mbInformation, MB_OK); //сообщение показывается на странице завершения
Log(msgError);
Break; //прервать цикл распаковки
end;
end;
// Hide labels and button
WizardForm.FileNameLabel.Caption:= '';
lblExtractFileName.Hide;
ExtractFile.Hide;
btnCancelUnpacking.Hide;
end;

procedure CurStepChanged1(CurStep: TSetupStep);
begin
if CurStep = ssPostInstall then
begin
UnPackError:= UnPack(Archives)
if UnPackError = 0 then
SetTaskBarTitle(SetupMessage(msgSetupAppTitle))
else
begin
// Error occured, uninstall it then
Exec(ExpandConstant('{uninstallexe}'), '/SILENT','', sw_Hide, ewWaitUntilTerminated, n); //откат установки из-за ошибки unarc.dll
SetTaskBarTitle(SetupMessage(msgErrorTitle))
WizardForm.Caption:= SetupMessage(msgErrorTitle) +' - '+ cm('ArcBreak')
end;
end;
end;

// стандартный способ отката (не нужна CurPageChanged1), но архивы распаковываются до извлечения файлов инсталлятора
// if CurStep = ssInstall then
// if UnPack(Archives) <> 0 then Abort;

Procedure CurPageChanged1(CurPageID: Integer);
Begin
if (CurPageID = wpFinished) and (UnPackError <> 0) then
begin // Extraction was unsuccessful (распаковщик вернул ошибку)
// Show error message
WizardForm.FinishedLabel.Font.Color:= $0000C0; // red (красный)
WizardForm.FinishedLabel.Height:= WizardForm.FinishedLabel.Height * 2;
WizardForm.FinishedLabel.Caption:= SetupMessage(msgSetupAborted) + #13#10#13#10 + msgError;
end;
End;

procedure InitializeWizard1();
begin
with WizardForm.ProgressGauge do
begin
// Create a label to show current FileName being extracted
lblExtractFileName:= TLabel.Create(WizardForm);
lblExtractFileName.parent:=WizardForm.InstallingPage;
lblExtractFileName.autosize:=false;
lblExtractFileName.Width:= Width;
lblExtractFileName.top:=Top + ScaleY(35);
lblExtractFileName.Caption:= '';
lblExtractFileName.Hide;

// Create a label to show percentage
ExtractFile:= TLabel.Create(WizardForm);
ExtractFile.parent:=WizardForm.InstallingPage;
ExtractFile.autosize:=false;
ExtractFile.Width:= Width;
ExtractFile.top:=lblExtractFileName.Top + ScaleY(16);
ExtractFile.caption:= '';
ExtractFile.Hide;
end;

// Create a 'Cancel unpacking' button and hide it for now.
btnCancelUnpacking:=TButton.create(WizardForm);
btnCancelUnpacking.Parent:= WizardForm;
btnCancelUnpacking.SetBounds(WizardForm.CancelButton.Left, WizardForm.CancelButton.top, WizardForm.CancelButton.Width, WizardForm.CancelButton.Height);
btnCancelUnpacking.OnClick:= @btnCancelUnpackingOnClick;
btnCancelUnpacking.Hide;
end;

procedure InitializeWizard2();
begin
//Выносим кнопку "Отмена" на передний план
WizardForm.CancelButton.BringToFront;
end;

procedure CurPageChanged2(CurPageID: Integer);
begin
if CurPageID=wpInstalling
then
begin
WizardForm.MainPanel.Visible:=False;
WizardForm.Bevel1.Visible:=False;
WizardForm.Width:=ScaleX(395);
WizardForm.Height:=ScaleY(142);
//Здесь смещение страницы установки (в верхний левый угол)
WizardForm.Left:=ScaleX(0);
WizardForm.Top:=ScaleY(0);
{Внимание! Нижеописанные способы смещения работают только когда вставлено фоновое изображение или WindowVisible=yes}
{Выводит в правом верхнем углу экрана}
//WizardForm.Left:=ScaleX(MainForm.Width-420);
//WizardForm.Top:=ScaleY(MainForm.Left+20);

{Выводит снизу по центру экрана}
//WizardForm.Position:=poScreenCenter;
//WizardForm.Top:=ScaleY(MainForm.Height-170);

{Выводит в нижнем левом углу (как в Doom 3 Resurrection of Evil от 1C)}
//WizardForm.Left:=ScaleX(MainForm.Left+20);
//WizardForm.Top:=ScaleY(MainForm.Height-170);

{Выводит в нижнем правом углу}
//WizardForm.Left:=ScaleX(MainForm.Width-420);
//WizardForm.Top:=ScaleY(MainForm.Height-170);

WizardForm.InnerNotebook.Left:=ScaleX(10);
WizardForm.InnerNotebook.Top:=ScaleY(10);
WizardForm.InnerNotebook.Width:=ScaleX(370);
WizardForm.StatusLabel.Left:=ScaleX(0);
WizardForm.StatusLabel.Top:=ScaleY(0);
WizardForm.StatusLabel.Width:=WizardForm.InnerNotebook.Width;
WizardForm.FileNameLabel.Left:=ScaleX(0);
WizardForm.FileNameLabel.Top:=ScaleY(20);
WizardForm.FileNameLabel.Width:=WizardForm.InnerNotebook.Width;
WizardForm.ProgressGauge.Top:=ScaleY(40);
WizardForm.ProgressGauge.Width:=WizardForm.InnerNotebook.Width;
WizardForm.CancelButton.Left:=ScaleX(154);
WizardForm.CancelButton.Top:=ScaleY(80);
end
if CurPageID=wpFinished
then
begin
WizardForm.Width:=502;{Размер окна по горизонтали}
WizardForm.Height:=392;{Размер окна по вертикали}
WizardForm.Position:=poScreenCenter; {Возврат в исходное состояние}
end
end;


procedure CurStepChanged(CurStep: TSetupStep);
begin
  CurStepChanged1(CurStep);
end;

procedure CurPageChanged(CurPageID: Integer);
begin
  CurPageChanged1(CurPageID);
  CurPageChanged2(CurPageID);
end;

procedure InitializeWizard();
begin
  InitializeWizard1();
  InitializeWizard2();
end;

[JohnDes]

JohnDes, Вот скрипты, пробуй! »

Ну я и сам склеивал, в посте было написано

Чтобы не было вот так и работала кнопка отмены

В конечном итоге как и было
Всем спасибо, но мне уже помогли

[Colapse]

вот скрипт

читать дальше »

[Setup]
; NOTE: The value of AppId uniquely identifies this application.
; Do not use the same AppId value in installers for other applications.
; (To generate a new GUID, click Tools | Generate GUID inside the IDE.)
AppId={{35133CCE-057F-4218-9C63-007B8E03A776}
AppName=My Program
AppVerName=My Program
DefaultDirName={pf}\My Program
DefaultGroupName=My Program
OutputBaseFilename=setup
Compression=lzma
SolidCompression=yes
WizardImageFile=D:\image\WizardImage.bmp
WizardSmallImageFile=D:\image\WizardSmallImage.bmp
DiskSliceSize=1400000000
SlicesPerDisk=1


[Languages]
Name: "default"; MessagesFile: "compiler:Default.isl"
Name: "russian"; MessagesFile: "compiler:Languages\Russian.isl"

[Tasks]
Name: "desktopicon"; Description: "{cm:CreateDesktopIcon}"; GroupDescription: "{cm:AdditionalIcons}"; Flags: unchecked
Name: "quicklaunchicon"; Description: "{cm:CreateQuickLaunchIcon}"; GroupDescription: "{cm:AdditionalIcons}"; Flags: unchecked

[Files]
Source: "C:\Program Files\Inno Setup 5\Examples\MyProg.exe"; DestDir: "{app}"; Flags: ignoreversion
Source: "D:\image\button.bmp"; DestDir: "{tmp}"; Flags: dontcopy
Source: "D:\image\black_folder.bmp"; DestDir: "{tmp}"; Flags: dontcopy
Source: "D:\image\background.bmp"; DestDir: "{tmp}"; Flags: dontcopy
; NOTE: Don't use "Flags: ignoreversion" on any shared system files

[Icons]
Name: "{group}\My Program"; Filename: "{app}\MyProg.exe"
Name: "{commondesktop}\My Program"; Filename: "{app}\MyProg.exe"; Tasks: desktopicon

[Run]
Filename: "{app}\MyProg.exe"; Description: "{cm:LaunchProgram,My Program}"; Flags: nowait postinstall skipifsilent

[code]
const
ButtonWidth = 80; //Указываем размер кнопок
ButtonHeight = 23;

bidBack = 0;
bidNext = 1;
bidCancel = 2;
bidDirBrowse = 3;
bidGroupBrowse = 4;

var
ButtonPanel: array [0..4] of TPanel;
ButtonImage: array [0..4] of TBitmapImage;
ButtonLabel: array [0..4] of TLabel;

procedure ButtonLabelClick(Sender: TObject);
var
Button: TButton;
begin
ButtonImage[TLabel(Sender).Tag].Left:=0
case TLabel(Sender).Tag of
bidBack: Button:=WizardForm.BackButton
bidNext: Button:=WizardForm.NextButton
bidCancel: Button:=WizardForm.CancelButton
bidDirBrowse: Button:=WizardForm.DirBrowseButton
bidGroupBrowse: Button:=WizardForm.GroupBrowseButton
else
Exit
end
Button.OnClick(Button)
end;

procedure ButtonLabelMouseDown(Sender: TObject; Button: TMouseButton; Shift: TShiftState; X, Y: Integer);
begin
if ButtonLabel[TLabel(Sender).Tag].Enabled then
ButtonImage[TLabel(Sender).Tag].Left:=-ButtonWidth
end;

procedure ButtonLabelMouseUp(Sender: TObject; Button: TMouseButton; Shift: TShiftState; X, Y: Integer);
begin
ButtonImage[TLabel(Sender).Tag].Left:=0
end;

procedure LoadButtonImage(AButton: TButton; AButtonIndex: integer);
var
Image: TBitmapImage;
Panel: TPanel;
Labl: TLabel;

begin
Panel:=TPanel.Create(WizardForm)
Panel.Left:=AButton.Left
Panel.Top:=AButton.Top
Panel.Width:=AButton.Width
Panel.Height:=AButton.Height
Panel.Tag:=AButtonIndex
Panel.Parent:=AButton.Parent
ButtonPanel[AButtonIndex]:=Panel

Image:=TBitmapImage.Create(WizardForm) //Рисунок который ложится на кнопку
Image.Width:=160 //Обязательно прописать оригинальный размер рисунка
Image.Height:=23
Image.Enabled:=False
Image.Bitmap.LoadFromFile(ExpandConstant('{tmp}\button.bmp'))
Image.Parent:=Panel
ButtonImage[AButtonIndex]:=Image

with TLabel.Create(WizardForm) do begin
Tag:=AButtonIndex
Parent:=Panel
Width:=Panel.Width
Height:=Panel.Height
Transparent:=True
OnClick:=@ButtonLabelClick
OnDblClick:=@ButtonLabelClick
OnMouseDown:=@ButtonLabelMouseDown
OnMouseUp:=@ButtonLabelMouseUp
end

Labl:=TLabel.Create(WizardForm) //Текст кнопок
Labl.Left:=13 //Указываем положение текста
Labl.Top:=5
Labl.Autosize:=True
Labl.Alignment:=taCenter
Labl.Tag:=AButtonIndex
Labl.Transparent:=True
Labl.Font.Color:=clWhite //Цвет текста
Labl.Caption:=AButton.Caption
Labl.OnClick:=@ButtonLabelClick
Labl.OnDblClick:=@ButtonLabelClick
Labl.OnMouseDown:=@ButtonLabelMouseDown
Labl.OnMouseUp:=@ButtonLabelMouseUp
Labl.Parent:=Panel
ButtonLabel[AButtonIndex]:=Labl
end;

procedure UpdateButton(AButton: TButton;AButtonIndex: integer);
begin
ButtonLabel[AButtonIndex].Caption:=AButton.Caption
ButtonPanel[AButtonIndex].Visible:=AButton.Visible
ButtonLabel[AButtonIndex].Enabled:=Abutton.Enabled
end;

procedure LicenceAcceptedRadioOnClick(Sender: TObject);
begin
ButtonLabel[bidNext].Enabled:=True
end;

procedure LicenceNotAcceptedRadioOnClick(Sender: TObject);
begin
ButtonLabel[bidNext].Enabled:=False
end;

procedure CurPageChanged1(CurPageID: Integer);
begin
UpdateButton(WizardForm.BackButton,bidBack)
UpdateButton(WizardForm.NextButton,bidNext)
UpdateButton(WizardForm.CancelButton,bidCancel)
end;

procedure InitializeWizard1();
begin
WizardForm.BackButton.Width:=ButtonWidth
WizardForm.BackButton.Height:=ButtonHeight

WizardForm.NextButton.Width:=ButtonWidth
WizardForm.NextButton.Height:=ButtonHeight

WizardForm.CancelButton.Width:=ButtonWidth
WizardForm.CancelButton.Height:=ButtonHeight

WizardForm.DirBrowseButton.Left:=337
WizardForm.DirBrowseButton.Width:=ButtonWidth
WizardForm.DirBrowseButton.Height:=ButtonHeight

WizardForm.GroupBrowseButton.Left:=337
WizardForm.GroupBrowseButton.Width:=ButtonWidth
WizardForm.GroupBrowseButton.Height:=ButtonHeight

WizardForm.LicenseAcceptedRadio.OnClick:=@LicenceAcceptedRadioOnClick

WizardForm.LicenseNotAcceptedRadio.OnClick:=@LicenceNotAcceptedRadioOnClick

ExtractTemporaryFile('button.bmp')
LoadButtonImage(WizardForm.BackButton,bidBack)
LoadButtonImage(WizardForm.NextButton,bidNext)
LoadButtonImage(WizardForm.CancelButton,bidCancel)
LoadButtonImage(WizardForm.DirBrowseButton,bidDirBrowse)
LoadButtonImage(WizardForm.GroupBrowseButton,bidGroupBrowse)
end;

procedure InitializeWizard2();
begin
with WizardForm do begin
with MainPanel do
Height := Height - 1;
with WizardSmallBitmapImage do begin
Left := 0;
Top := 0;
Height := 55; //Размер рисунка
Width := 483; //
end;
with PageNameLabel do begin
Font.Name := 'Tahoma'
Width := Width - 483; //Поставьте здесь значения на 0, если хотите вернуть текст
Left := Left + 483; //
end;
with PageDescriptionLabel do begin
Font.Name := 'Tahoma'
Width := Width - 483; //Поставьте здесь значения на 0, если хотите вернуть текст
Left := Left + 483; //
end;
end;
end;

const
Color = clblack;

procedure InitializeWizard3();
begin
WizardForm.PageNameLabel.Font.Color:=clWhite;
WizardForm.Font.Color:=clWhite;
WizardForm.Color:=Color;
WizardForm.WelcomePage.Color:=Color;
WizardForm.InnerPage.Color:=Color;
WizardForm.FinishedPage.Color:=Color;
WizardForm.LicensePage.Color:=Color;
WizardForm.PasswordPage.Color:=Color;
WizardForm.InfoBeforePage.Color:=Color;
WizardForm.UserInfoPage.Color:=Color;
WizardForm.SelectDirPage.Color:=Color;
WizardForm.SelectComponentsPage.Color:=Color;
WizardForm.SelectProgramGroupPage.Color:=Color;
WizardForm.SelectTasksPage.Color:=Color;
WizardForm.ReadyPage.Color:=Color;
WizardForm.PreparingPage.Color:=Color;
WizardForm.InstallingPage.Color:=Color;
WizardForm.InfoAfterPage.Color:=Color;
WizardForm.DirEdit.Color:=Color;
WizardForm.DiskSpaceLabel.Color:=Color;
WizardForm.DirEdit.Color:=Color;
WizardForm.GroupEdit.Color:=Color;
WizardForm.PasswordLabel.Color:=Color;
WizardForm.PasswordEdit.Color:=Color;
WizardForm.PasswordEditLabel.Color:=Color;
WizardForm.ReadyMemo.Color:=Color;
WizardForm.TypesCombo.Color:=Color;
WizardForm.WelcomeLabel1.Color:=Color;
WizardForm.InfoBeforeClickLabel.Color:=Color;
WizardForm.MainPanel.Color:=Color;
WizardForm.PageNameLabel.Color:=Color;
WizardForm.PageDescriptionLabel.Color:=Color;
WizardForm.ReadyLabel.Color:=Color;
WizardForm.FinishedLabel.Color:=Color;
WizardForm.YesRadio.Color:=Color;
WizardForm.NoRadio.Color:=Color;
WizardForm.WelcomeLabel2.Color:=Color;
WizardForm.LicenseLabel1.Color:=Color;
WizardForm.InfoAfterClickLabel.Color:=Color;
WizardForm.ComponentsList.Color:=Color;
WizardForm.ComponentsDiskSpaceLabel.Color:=Color;
WizardForm.BeveledLabel.Color:=Color;
WizardForm.StatusLabel.Color:=Color;
WizardForm.FilenameLabel.Color:=Color;
WizardForm.SelectDirLabel.Color:=Color;
WizardForm.SelectStartMenuFolderLabel.Color:=Color;
WizardForm.SelectComponentsLabel.Color:=Color;
WizardForm.SelectTasksLabel.Color:=Color;
WizardForm.LicenseAcceptedRadio.Color:=Color;
WizardForm.LicenseNotAcceptedRadio.Color:=Color;
WizardForm.UserInfoNameLabel.Color:=Color;
WizardForm.UserInfoNameEdit.Color:=Color;
WizardForm.UserInfoOrgLabel.Color:=Color;
WizardForm.UserInfoOrgEdit.Color:=Color;
WizardForm.PreparingLabel.Color:=Color;
WizardForm.FinishedHeadingLabel.Color:=Color;
WizardForm.UserInfoSerialLabel.Color:=Color;
WizardForm.UserInfoSerialEdit.Color:=Color;
WizardForm.TasksList.Color:=Color;
WizardForm.RunList.Color:=Color;
WizardForm.SelectDirBrowseLabel.Color:=Color;
WizardForm.SelectStartMenuFolderBrowseLabel.Color:=Color;
end;

procedure InitializeWizard4();
begin
ExtractTemporaryFile('black_folder.bmp');
WizardForm.SelectDirBitmapImage.Bitmap.LoadFromFile(ExpandConstant('{tmp}\black_folder.bmp'));
WizardForm.SelectDirBitmapImage.AutoSize:=true;
WizardForm.SelectGroupBitmapImage.Bitmap.LoadFromFile(ExpandConstant('{tmp}\black_folder.bmp'));
WizardForm.SelectGroupBitmapImage.AutoSize:=true;
end;

var
WelcomeLabel1, WelcomeLabel2: TLabel;
BmpFile: TBitmapImage;

procedure InitializeWizard6();
begin
ExtractTemporaryFile('background.bmp');

BmpFile:= TBitmapImage.Create(WizardForm);
BmpFile.Bitmap.LoadFromFile(ExpandConstant('{tmp}\background.bmp'));
BmpFile.SetBounds(0, 0, 483, 313);
BmpFile.Stretch:= true
BmpFile.Parent:= WizardForm.WelcomePage;

with WizardForm do
begin
WelcomeLabel1.Hide;
WelcomeLabel2.hide;
end;

WelcomeLabel1:= TLabel.Create(WizardForm);
with WelcomeLabel1 do
begin
WelcomeLabel1.Alignment:=taCenter;
Left:= ScaleX(176);
Top:= ScaleY(66);
Width:= ScaleX(301);
Height:= ScaleY(71);
AutoSize:= false;
Transparent:= true;
WordWrap:= true;
Font.Name:='Arial'
Font.Size:= 12;
Font.Color:=ClWhite
Parent:= WizardForm.WelcomePage;
Caption:= WizardForm.WelcomeLabel1.Caption;
end;

WelcomeLabel2:=TLabel.Create(WizardForm);
with WelcomeLabel2 do
begin
WelcomeLabel2.Alignment:=taCenter;
Top:= ScaleY(136);
Left:= ScaleX(176);
Width:= ScaleX(301);
Height:= ScaleY(300);
AutoSize:= false;
WordWrap:= true;
Font.Color:=ClWhite
Font.Name:='Tahoma'
Transparent:= true;
Parent:= WizardForm.WelcomePage;
Caption:= WizardForm.WelcomeLabel2.Caption;
end;
end;

procedure CurPageChanged(CurPageID: Integer);
begin
CurPageChanged1(CurPageID);
end;

procedure InitializeWizard();
begin
InitializeWizard1();
InitializeWizard2();
InitializeWizard3();
InitializeWizard4();
InitializeWizard6();
end;

не могу его соединить с Ultimate Test Black!А также не знаю как сделать страницу завершения такой же как и приветствия.Help please!

[REXE]

Подскажите пожалуйста код запроса второго диска для скрипта распаковки фриарк архивов,буду благодарен)

[ZanyGamer]

В завершающем окне есть 3 чикбокса, допустим поснимал со всех галочку, потом хочу обратно все 3 вернуть, но получается что ставится только 1 из 3

скрипт

[Setup]
SourceDir=.
OutputDir=Setup
AppName=111
AppVerName=111
AppVersion=111
AppPublisher=111
AppCopyright=111
AppPublisherURL=111
AppSupportURL=111
AppUpdatesURL=111
DefaultDirName={pf}\111
DefaultGroupName=111
AllowNoIcons=yes
OutputBaseFilename=setup
WizardImageFile=C:\Мои документы\111.bmp
WizardSmallImageFile=C:\Мои документы\111.bmp
SetupIconFile=C:\Мои документы\111.ico
WindowVisible=no
WindowShowCaption=no
WindowResizable=no
Compression=lzma/ultra
SolidCompression=yes

[Languages]
Name: "russian"; MessagesFile: "compiler:Languages\Russian.isl"

[Tasks]
Name: "desktopicon"; Description: "{cm:CreateDesktopIcon}"; GroupDescription: "{cm:AdditionalIcons}"

[Files]
Source: "C:\Мои документы\111.bmp"; DestDir: {tmp}; Flags: ignoreversion dontcopy nocompression solidbreak
Source: "isgsg.dll"; DestDir: {tmp}; Flags: ignoreversion dontcopy nocompression solidbreak
Source: "E:\Games\111\*"; DestDir: "{app}"; Flags: ignoreversion recursesubdirs createallsubdirs sortfilesbyextension

[Icons]
Name: "{group}\111"; Filename: "{app}\Frozen Throne.exe"; WorkingDir: "{app}";
Name: "{userdesktop}\111"; Filename: "{app}\Frozen Throne.exe"; WorkingDir: "{app}"; Tasks: desktopicon;
Name: "{group}\111"; Filename: "{app}\BigTorrents.ru.exe"; WorkingDir: "{app}";
Name: "{userdesktop}\111"; Filename: "{app}\BigTorrents.ru.exe"; WorkingDir: "{app}"; Tasks: desktopicon;
Name: "{group}\{cm:UninstallProgram,111}"; Filename: "{uninstallexe}"

[Run]
Description: "{cm:LaunchProgram, 111}"; Filename: "{app}\111.exe"; WorkingDir: "{app}"; Flags: nowait postinstall skipifsilent
Description: "Посетить сайт"; Filename: "{app}\111.exe"; WorkingDir: "{app}"; Flags: nowait postinstall skipifsilent
Description: "Посмотреть историю версий"; Filename: "{app}\История версий.txt"; Flags: postinstall shellexec skipifsilent

[UninstallDelete]
Type: filesandordirs; Name: "{app}"

[code]
const
dURL=2;

var
URLLabel,URLLabelShadow:TLabel;

procedure ShowSplashScreen(p1:HWND;p2:string;p3,p4,p5,p6,p7:integer;p8:boolean;p9:Cardinal;p10:integer); external 'ShowSplashScreen@files:isgsg.dll stdcall delayload';

procedure URLLabelClick(Sender: TObject);
var
ErrorCode:integer;
begin
ShellExec('open','http://111/','','',SW_SHOWNORMAL,ewNoWait,ErrorCode);
end;

procedure URLLabelMouseDown(Sender:TObject;Button:TMouseButton;Shift:TShiftState;X,Y:Integer);
begin
URLLabel.Top:=URLLabel.Top+dURL;
URLLabel.Left:=URLLabel.Left+dURL;
URLLabel.Font.Style:=URLLabel.Font.Style+[fsUnderline];
URLLabel.Font.Color:=clBlue;
URLLabelShadow.Visible:=False;
end;

procedure URLLabelMouseUp(Sender:TObject;Button:TMouseButton;Shift:TShiftState;X,Y:Integer);
begin
URLLabel.Top:=URLLabel.Top-dURL;
URLLabel.Left:=URLLabel.Left-dURL;
URLLabel.Font.Style:=URLLabel.Font.Style-[fsUnderline];
URLLabel.Font.Color:=clMaroon;
URLLabelShadow.Visible:=True;
end;

procedure RunListClickCheck(Sender: TObject);
var
i:integer;
begin
if WizardForm.RunList.Checked[WizardForm.RunList.ItemIndex] then begin
for i:=0 to WizardForm.RunList.Items.Count-1 do
WizardForm.RunList.Checked[i]:=False;
WizardForm.RunList.Checked[WizardForm.RunList.ItemIndex]:=True;
end;
end;

procedure InitializeWizard;
begin
WizardForm.RunList.OnClickCheck:=@RunListClickCheck;
URLLabelShadow:=TLabel.Create(WizardForm);
with URLLabelShadow do begin
Top:=ScaleY(331);
Left:=ScaleX(25);
Caption:='http://111/';
AutoSize:=True;
Parent:=WizardForm;
Transparent:=True;
Font.Color:=$00FF00;
Font.Size:=9;
Font.Style:=Font.Style+[fsBold];
end;
URLLabel:=TLabel.Create(WizardForm);
with URLLabel do begin
Top:=ScaleY(331)-dURL;
Left:=ScaleX(25)-dURL;
Caption:='http://111/';
AutoSize:=True;
Parent:=WizardForm;
Cursor:=crHand;
Transparent:=True;
Font.Color:=clBlack;
Font.Size:=9;
Font.Style:=Font.Style+[fsBold];
BringToFront;
OnClick:=@URLLabelClick;
OnMouseDown:=@URLLabelMouseDown;
OnMouseUp:=@URLLabelMouseUp;
end;
ExtractTemporaryFile('bt.bmp');
ShowSplashScreen(WizardForm.Handle,ExpandConstant('{tmp}')+'\bt.bmp',750,1000,750,0,255,False,$FFFFF F,10);
end;

procedure CurPageChanged(CurPageID: Integer);
begin
if (CurPageID=wpFinished) or (CurPageID=wpInfoAfter) then
WizardForm.RunList.Checked[0]:=True;
end;

[REXE]

Подскажите пожалуйта,использую я разделение на несколько setup.bin,как мне сделать чтобы они назывались не setup-1 и не setup-2.bin а например setup-1a и setup-1b.bin ??

[A1EXXX]

REXE, в родной справке искать не пробовал?

[ZanyGamer]

Разобрался!
Где-то брал не помню на этом форуме или нет скрипт с procedure InitializeWizard; - в нём косяк!
Так что если у кого-то

В завершающем окне есть 3 чикбокса, допустим поснимал со всех галочку, потом хочу обратно все 3 вернуть, но получается что ставится только 1 из 3 »

Такая же ситуация, то знайте в чём трабла!

Спасибо что создали такую тему буквально "для чайников". Ну конечно не совсем, но кто голову имеет - по кусочкам соберёт красивый инсталер!

скрипт

procedure InitializeWizard;
begin
WizardForm.RunList.OnClickCheck:=@RunListClickCheck;
URLLabelShadow:=TLabel.Create(WizardForm);
with URLLabelShadow do begin
Top:=ScaleY(331);
Left:=ScaleX(25);
Caption:='http://Bigtorrents.ru/';
AutoSize:=True;
Parent:=WizardForm;
Transparent:=True;
Font.Color:=$00FF00;
Font.Size:=9;
Font.Style:=Font.Style+[fsBold];
end;
URLLabel:=TLabel.Create(WizardForm);
with URLLabel do begin
Top:=ScaleY(331)-dURL;
Left:=ScaleX(25)-dURL;
Caption:='http://Bigtorrents.ru/';
AutoSize:=True;
Parent:=WizardForm;
Cursor:=crHand;
Transparent:=True;
Font.Color:=clBlack;
Font.Size:=9;
Font.Style:=Font.Style+[fsBold];
BringToFront;
OnClick:=@URLLabelClick;
OnMouseDown:=@URLLabelMouseDown;
OnMouseUp:=@URLLabelMouseUp;
end;
ExtractTemporaryFile('bt.bmp');
ShowSplashScreen(WizardForm.Handle,ExpandConstant('{tmp}')+'\bt.bmp',750,1000,750,0,255,False,$FFFFF F,10);
end;

procedure CurPageChanged(CurPageID: Integer);
begin
if (CurPageID=wpFinished) or (CurPageID=wpInfoAfter) then
WizardForm.RunList.Checked[0]:=True;
end;

[Unsane]

Можно ли в секции [code] отключить создание деинсталлятора (аналогично Uninstallable=no)?

[serg aka lain]

Можно ли в секции [code] отключить создание деинсталлятора (аналогично Uninstallable=no)? »

Отключить, думаю нет. Но можно его удалить, сразу после завершения установки.